Filter By:
- BMX (1)
- Bottom Brackets (23)
- Brakes/Levers/Pads (86)
- Cables (15)
- Cassettes/Freewheels (24)
- Chainrings (39)
- Chains (32)
- Cranksets (15)
- Show More Categories
- Derailleurs (15)
- Handlebar Grips/Tape (14)
- Handlebars (9)
- Headsets (17)
- Pedals (21)
- Saddles (7)
- Seatposts (6)
- Shift/Brake Combinations (3)
- Shifters (24)
- Stems (6)
- Tires/Tubes (150)
- Wheels (34)
- Other (116)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$43.95
- Guidering M to fit any 4x104mm BCD crank
- Dual width "M" (narrow/wide) tooth profile engages the chain securely even at extreme angles
- 7075-T6 aluminum construction optimized for all chainguide systems to prevent chain jamming
- 1mm swappable chainline
$59.95
Lighter, stronger, and better looking than our original Guiderings; the Guidering SL is intended for use on TRS, LG1, and legacy e*thirteen cranks.
The Guidering SL is -8mm offset. This offset will achieve both boost (52mm) and non-boost (49mm) spacing on e*thirteen cranks that feature adjustable chainline (2019 and newer TRS & LG1). On legacy and XCX cranks the Guidering SL will achieve a 49mm non-boost chainline.
- Direct Mount chainring for TRS and LG1 cranks
- Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain
- 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains
- Allows both Boost 148mm and non-boost 142mm chainline on adjustable TRS and LG1 cranks
SL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings.
$64.95 - $79.95
UL Chainrings are the lightest 1x XC/Gravel chainrings on the market. Using the SL Chainring as the platform, we tweaked the arm design and strategically machined the chainring so that only minimal sacrifice was made in impact strength for large gains in weight reduction.
- Direct Mount chainring for XCX, TRS, and LG1 cranks
- Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain
- 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains
- Provides Boost 148mm chainline on XCX Mountain cranks and 142mm chainlines on XCX Gravel cranks
- Provides chainline for Superboost spacing on TRS and LG1 cranks
UL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings available soon.
$69.95
- Bottom brackets for e*thirteen XCX, TRS, and LG1 cranks. Also compatible with older Fifteen.G cranks (requires spacer and wave washer kit)
- 7075-T6 black anodized cups with custom angular contact bearings
- One year no questions ask
- Model: EXA+
- Interface: P3 Connect
- Shell: English
- For installation of BSA bottom brackets, use e*thirteen BB tool (included with cranksets) or a 1-3/4" 12 point socket
$61.99 - $64.99
absoluteBLACK Round 104/64 BCD Chainrings are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability.
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- The chainring's offset helps to create an ideal chainline
- Provides exceptional reliability, weight savings, and stiffness
- 9, 10, 11, and 12-speed Eagle compatible
- Use with absoluteBLACK short chainring bolts
$79.49
absoluteBLACK Round Direct Mount 1x Chainrings for SRAM offer flawless drivetrain setup for SRAM 1x9, 1x10, 1x11, and 1x12-speed or single speed. They are designed for SRAM DUB, GXP, and BB30 cranks that have a removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability.
- The unique, patent-pending narrow-wide tooth profile keeps the chain in place
- Teeth have been 3D-machined for ultimate mud shedding and quieter operation
- Provides excellent weight-to-strength ratio
- 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long-Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks
$15.00
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves.
- For use with threaded Presta (non-removable core) tubes
- Knurled end to keep pump from slipping
- Available in all lengths to match all Zipp wheels
- 3mm hex broach in the barrel to guarantee a perfect seal when tightened
$44.00 - $47.00
Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.
$199.99 - $200.49
$199.99 - $200.49
On Sale
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel
$21.99
Roadlink Rear Derailleur Part
- The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes
- 11-42 or 10-42 setups are not supported
- Works with all 10-11 speed Shimano and SRAM Road Derailleurs
- Best used with Single or Double Setups - see manufacturer's site for more details
$69.95
Looking for a 1X chainring for your new Shimano XT, SLX or Deore crankset with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in the form of a beautifully machined asymmetrical 96 mm BCD that provides the ideal 1X chainline of 49mm.
Note -
The 28T and 26T sizes will mount to the inner 64 BCD mounting position on these cranksets.
Compatibility:
- These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC M5100 1x or 2x cranksets
- Not compatible with Deore triple (3x) cranksets
- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Provide a great chainline on most Boost bikes. See this explanation for details.
- Drop-Stop A models will reduce the chainline (inward towards the frame) from the Shimano specified chainline for the crankset: 26T-28T = -3mm, 30T-34T = -2mm, and 36T-38T = -1mm
- Drop-Stop ST models will have the same chainline as the Shimano specified chainline
- 10mm bolts are optimized for mounting this ring
- Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A.
DROP-STOP A
- Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc.
- NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy
DROP-STOP ST
- Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only
- Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain
Recommendations -
If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.
Tech Specs:
- Weight: 26t/42g | 28t/50g | 30t/41g | 32t/50g | 34t/59g | 36t/69g
- Material: 7075-T6 aluminum
- Made in the USA
$69.99
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility
$74.95 - $79.95
"More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval.
Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you’re climbing.
We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone.
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® tooth profiles for the best wear life, chain retention and mud clearance. We have optimized tooth profiles for SRAM T-Type Transmission, Shimano Hyperglide+, and all 12, 11, 10, and 9-speed chains.
Compatibility
- Any Race Face Cinch™ system crankset (including Next SL, Sixc, Turbine, Aeffect)
- Riders running SRAM Transmission w/ Race Face Cinch cranksets with a Boost 136/137mm spindle use a Cinch direct mount 0mm offset chainring.
- Riders using a Cinch crankset with a Super Boost 151mm spindle use a Cinch direct mount 3mm offset chainring.
- Standard (142mm rear hub spacing) 6mm offset, Boost (148mm hub spacing) 3mm offset, and Boost for T-Type Transmission 55mm chainline 0mm offset are available.
- Use a 3mm offset chainring for Super Boost applications running standard drivetrains or Transmission.
- Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.
- For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle)
--- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).
- Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!)
- Chainline 49mm (standard), 52mm (Boost), 55mm (T-Type Boost)
- Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A.
Recommendations
- If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck."
$84.95 - $89.95
These chainrings are for Shimano GRX cranks. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Drop-Stop ST is specifically for the Shimano 12-speed Hyperglide+ chain, which is used by GRX 12-speed. Drop Stop-B works with all other 9, 10, 11, and 12-spd chains, including SRAM Flattop.
Compatibility:
- Shimano GRX cranksets including RX600 and RX810
- Drop-Stop ST is designed for Shimano 12-speed Hyperglide+ chains
- Drop-Stop B tooth profile is compatible with SRAM Flattop chain
- Wolf Tooth’s patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud-shedding ability
- Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo.
DROP-STOP B
Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC
Not compatible with 12spd Shimano HG+ chains
$45.00 - $48.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components.
- Bead-blasted, then anodized, finish
- 3D-forged for increased strength, then CNC-machined
- 4-bolt faceplate design for easy installation
$1.80 - $7.35
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels.
- 14mm x 1mm (1411-AN) sold in pairs
- All others sold individually
$5.95
- Shim adds support to presta stem used in a schrader rim
$7.00
Carbon fiber headset stack spacers, precision cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets
$12.99
Carbon fiber headset stack spacers, precision cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets
$22.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$22.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$22.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$27.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- CNC machined 6061 aluminum
- Black anodized finish
- Made in the USA
$32.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
$32.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA
Page 1 of 22
Next page