Other
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm
$24.99
The Problem Solvers Center Lock Rotor Adapters are CNC-machined aluminum adapters that allow the use of 6-bolt rotors on Shimano's Center Lock hubs.
$9.99 - $17.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
$15.49 - $17.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of aluminum and feature dual-hex heads for easy, secure installation.
$24.99 - $44.99
The Problem Solvers Head Tube Reducers resize your head tube to accommodate different size forks. These fine aluminum reducers are designed for traditional, external-cup headsets. Please contact us for any questions about compatibility with your bicycle.
$49.99
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side.
- Hinged clamps for easy installation without removing other components
- AL-6061, anodized black
- 23 grams
- For use only with I-Spec II compatible shifters or dropper lever
$29.95
Problem Solvers' MisMatch Adapters allow you to combine your Shimano and SRAM shifters and brakes onto a single clamp for a more ergonomic, less-cluttered handlebar. These CNC-machined aluminum adapters work with Shimano I-Spec and SRAM MatchMaker components to fasten your preferred combination on to a single, existing bar clamp.
$9.99
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
$10.49
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims.
-100mm long
-3mm lip
-Alloy
Problem Solvers Seatpost Shims are not intended for use with carbon seatposts
$10.49 - $20.49
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
$4.50
Switching over to hydraulic brakes? Secure your cables with Origin-8's Hydraulic Pass-thru inserts. They will securely hold the hydraulic hose in place while you ride.
• Fits bicycles with pass-thru braze-ons
• Holds hydraulic hose securely in place
• Bag of 10
$39.99 - $79.99
• Machined aluminum mounting arm
• Delrin (engineering grade thermoplastic) chain guide body
• Adjustable design
• Fits 32T to 38T chainrings
• Compatible with 1x drivetrain systems
• Clamp mount: 31.8-34.9mm
• Weight: 75g (BB Mount), 88g (clamp mount), 80g (Mini)
$7.99
- Upper cables for Odyssey's Gyro G3 (sold separately)
- Universal fit.
- Upper cables only.
$19.31
Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only.
- Sold individually
$16.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with Shimano, SRAM, and KMC 11-speed chains
$10.00 - $12.00
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$6.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC and Shimano 10-speed chains
- Includes 2 pairs
$1.00 - $8.00
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.50
Hope Pad Clip
- Fits Tech and Tech Evo M4, X2, and V2 Brakes
Featuring a universal design that allows the switch from a bolt to a QR-style clamp, the Hope Seat Clamp is designed to keep your seat post in one spot and look good doing it.
- Collar can be converted to QR
- Machined from billet 2014 T6 aluminum
- Bolt-compatible universal collars
- Available in Black, Silver, Red, Blue, Purple, and Orange
- Weight from 20g
$16.00
Replacement headset bearings from FSA.
- Compatible with most Trek MTB integrated headset systems
- Sealed bearing for long life
- Compatible with Knock Block Headsets
$22.00
Replacement headset bearings from FSA.
- Compatible with most Trek MTB integrated headset systems
- Sealed bearing for long life
- Compatible with Knock Block Headsets
$10.00
FSA Standard Headset Bearings
$25.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$12.00
FSA bearings that set directly into the frame without the use of pressed in cups.
- 36/45 degrees is Cane Creek-compatible
- 45/45 degrees is Campagnolo-compatible
$50.00
36 Air Shaft Assembly for Fox suspension forks.
$75.00
36 Air Shaft Assembly for Fox suspension forks.
$130.00
38 Air Shaft Assembly for Fox suspension forks.
$17.00
Air spring seal kits for Fox suspension repair and rebuild.
$20.00
Volume tuning kits for Fox rear suspension service and repair.
$23.50
ABI Headset Bearing for new builds or replacements.
$10.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$16.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$42.00
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
$9.99
- 1-1/8" Aluminum Headset Spacer Kit
- Includes two 3mm, two 5mm, and one 8mm Spacers (total of 5 spacers per kit)
- Spacers feature a thin profile for a minimalist style
- Color-match to your favorite DEITY kit
- Available in Polished Ano Colors
- Weight: 3mm (1g) / 5mm (2g) / 8mm (3g)
$15.99
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style.
- DEITY Circuit Seatpost Clamp - 34.9mm, Orange
$15.99
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style.
- DEITY Circuit Seatpost Clamp - 36.4mm, Blue
$19.99
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style.
- DEITY Circuit Seatpost Clamp - 38.6mm, Black
$19.99
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style.
- DEITY Circuit Seatpost Clamp - 38.6mm, Bronze
$19.99
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style.
- DEITY Circuit Seatpost Clamp - 38.6mm, Platinum
$16.99
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style.
- DEITY Circuit Seatpost Clamp - 38.6mm, Purple
$19.99
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style.
- DEITY Circuit Seatpost Clamp - 38.6mm, Red
$25.00
Seal kit replacement for Diamond model suspension forks.
$19.10
- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor
- Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors
- Designed for up to 210mm rotors
- Tabs in adapter mate to (6) M5 rotor bolt holes and is secured by CenterLock-style lockring, sandwiching 6-bolt rotor to adapter
- Lockring requires a 16-notch external bearing bottom bracket wrench
- CL-IS adapter is black and lockring is black with silver etching: 29g
$2.00
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss 240s Shim Ring
$16.49
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6803 Bearing
$16.49
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6902 Bearing
$12.00
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss Cartridge Bearing - 1728
$0.14
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$4.80
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 15.4mm, for ratchet
$105.00
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss Star Ratchet Kit - 36T
$129.99
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss Star Ratchet Kit - 54T
$94.99
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
Includes end cap for 12 x 142 and 12 x 148mm hubs
Fits Shimano 12-speed Micro Spline cassettes
Crafted from lightweight aluminum
Compatible with 12mm thru-axles