Shop Cycling Gear

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.

3 years of REVIVE out in the market resulted in another benchmark product for BikeYoke: REVIVE 2.0. The new extralong 213mm REVIVE required a lot of re-thinking and re-engineering the whole chassis structure and since we think they deserve it, the shorter REVIVES will also get all the nice updates, and benefit from what was originally implemented only for the longest sibling of the REVIVE family. Noteworthy updates of the REVIVE 2.0 include: - One piece 3D-forged upper tube unit for improved stiffness and strength - Fully hard-anodized pin seats in the upper tube for improved corrosion-resistance - CNC-finished actuation lever for even smoother engagement - New upper saddle clamp and saddle bolts with integrated conical washers for even simpler saddle installation Wanna know more about the REVIVE? What if there was a dropper post, that actually solves and not just improves reliability issues, saves cost and time on the long run, and does not let you worry about too much time spent at service-centers? Or how about “bleeding” your seat post within a few seconds, while it is still installed in your bike? BikeYoke presents the REVIVE dropper post, featuring one of the most brilliant design features in dropper post design in many years. More than 10 years of experience in drop-post design went into the “REVIVE” and the development has finally paid off. Of, course, just as many other companies, BikeYoke would say, that REVIVE is reliable and strong and smooth. And yes, REVIVE is all of that, but not because we tried to improve current designs, but because we were thinking outside of the box and created a new concept, that is completely different from everything before. To understand the benefits over other posts you have to know about the problems of many current designs first. Many of the popular current seatpost designs are based on a hydraulic lockout-system that relies on a perfectly sealing IFP (Internal Floating Piston), separating oil from air to prevent the seatpost from getting sagging or bouncing. There are a lot of difficulties to overcome when using an IFP because an IFP has to maintain 100% sealing function. If air could go to the oil side, your post will start becoming springy. This happens to a lot of posts in the market already and is the main issue why posts need to be serviced. That´s why BikeYoke´s “REVIVE” features a NON-IFP design, because we think it is too difficult - if not impossible - to make a really reliable design using an IFP. REVIVE only requires 2 dynamic seals in the hydraulic circuit: The shaft sealing and the main piston sealing for the lockout mechanism. The highly critical IFP has been removed, and with it the need of perfect concentricity and finish of the sealing surfaces of the tubes. The lack of an IFP also results in the smoothest action you can think of. The most important and ground-breaking feature of Revive is its “REVIVE-VALVE”. Even REVIVE can get air somewhere where it does not belong. This can happen for example when you actuate your seatpost while its upside down. And here is where the patented RESET VALVE comes into play: - Insert a 4mm Hex Key into the REVIVE hex port, turn it and push down the post by hand. - This will reset your hydraulic circuit on the fly - whenever. wherever. This is done just within a few seconds and only by the turn of a 4mm Allen key or the integreated mini reset lever, that comes with the post - of course without even having to remove your drop post from your bike. So, now one might already understand that: - No external air will want go inside the post´s hydraulic circuit, since it is charged with higher pressure, than its surroundings. - No oil will go out (or at least very very little oil over the curse of a long time), because of very stable sealing - external sealing has never been a real problem of current post design - The hydraulic system can be reset to “new” via the unique “REVIVE-valving” - This means the hydraulic circuit is a very stable closed system and basically maintenance free. Still there are parts that will need to be serviced sooner or later and when designing REVIVE it was put a lot of attention to maximum user-friendly serviceability: - Bushings and keyway pins will wear over time. Usually, the pins wear first and you would want to replace them to reset your rotational play. - Exchanging the pins and the lower bushing is simple and does not require any opening of the hydraulic system and can be done within less than 5 minutes. 1 set REVIVE dropper post includes: - 1x REVIVE Seatpost - 1x cable housing 1500mm - 1x inner wire 1700mm - 2x housing endcap - 1x barrel cable clamp - 1x air valve adapter - 1x Quick-Reset-Lever - 1x remote (optional) - 1x BikeYoke I-spec adapter or Splits Clamp (optional) - 1 set titanium saddle bolts and nuts (optional)

- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each

Blackburn's biggest seat bag is built to bring it all with you. The Grid Large is spec'd with tough materials, an internal pocket/removeable divider, and is covered with reflective technology. Big enough to fit a jacket or 3 road tubes, a multi-tool, 2 tire levers and a CO2 inflator with a cartridge. A removable divider allows for easy organization. - Reflective material - Padded structure keeps its shape - Coated zipper, tail light loop, internal pocket - 48oz/1.4L/85cu in capacity - Weight: 130g

Customize the Switch Wrap Bag and load it up with your favorite tools. - Compact design—despite its near-limitless functionality, the big switch ratchet tool (sold separately) fits compactly in your hand thanks to a well-thought-out modular design allowing for leverage within the confines of a portable nylon wallet. - Customizable—wrap almost anything you need and take it with you. - Features specific sleeves for an inner tube, a 20g C02 cartridge, 2 tire levers, credit cards, and cash (sold separately) - Weight: 3.52oz - Lifetime warranty

Carrying dense cargo in the unused front triangle of your bicycle lowers your center of gravity and makes your bicycle more stable. If it's food, water, or tech equipment, the Blackburn Outpost Elite Frame Bag is designed to be your new go-to bikepacking bag. With waterproof, lightweight materials and welded seams, the new Outpost Elite Frame Bags are optimized to carry more mission-critical gear. Featuring (re)moveable Hypalon straps that protect your frame, the Elite Frame Bag comes in four sizes to fit a wide variety of bicycle sizes and styles. External pockets—The frame bags feature two external pockets with drain holes for when things get damp. Or keep your map/route close at hand. Hose port—The outpost elite frame bags feature a hose port to allow for the storage of a water reservoir and/or a cache battery to get dense heavy products to the lowest center of gravity. Waterproof zippers—Keep the outside, outside and your gear dry. The outpost elite frame bag is constructed of weatherproof materials and features welded seams and waterproof zippers. Organization—We carefully consider what is put in each of our bags and tailor the compartments, pockets, and other features to make sure there is a perfect place for everything. - Weight: 11.52 oz - Capacity: 6.76L - Dimensions: 482.6 x 330.2mm - Lifetime warranty

Our Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11, and 12-speed systems. 9-speed drivetrains require a 10-speed chain - For SRAM DM Boost cranks, 3mm offset for a perfect 52mm chainline - For SRAM DM cranks, 6mm offset for a perfect 49mm chainline - CNC'd in Canada from 7075 aluminum with laser-etched graphics

The Vault uses an all-condition tread pattern suitable for street, park and dirt riding. With a textured surface and slightly raised shoulder knobs, the Vault rolls fast without giving up traction. - Textured surface and slightly raised shoulder knobs for fast rolling and cornering traction

- Hardpack mountain bike tire designed to run in specific directions for the front and rear - In front, the Camber rolls fast, confidently grabbing corners even in the loose stuff - Reversed on the rear, the Camber gives you the same confidence in the corners, plus additional acceleration and climbing traction - Folding bead option also provides lightweight EPS puncture protection layer for outstanding performance and durability

The Patrol is an all-condition XC trail tire that excels on hardpacked to loose conditions. - Medium-height ramped center knobs roll fast and provide climbing traction - Aggressive shoulder lugs deliver secure traction in corners - Durable 27 TPI casing

- Versatile tread pattern suitable for a broad range of conditions - Medium-height center knobs are ramped to reduce rolling resistance and are staggered to provide a consistent feel across the profile of the tire - Side knobs are fairly aggressive and provide excellent cornering grip - Available with a wire bead or folding bead with EPS puncture protection

- Versatile tread pattern suitable for a broad range of conditions - Medium-height center knobs are ramped to reduce rolling resistance and are staggered to provide a consistent feel across the profile of the tire - Side knobs are fairly aggressive and provide excellent cornering grip - Available with a wire bead or folding bead with EPS puncture protection

A new design and improved cleanability maintains the Podium bottle's position as the best-of-the-best within the cycling industry. This premium bike bottle prioritizes performance and excellent cage fit above all else for both professional and recreational users. Easy to squeeze and always BPA free, the Podium is the ultimate bottle for rapid and reliable hydration. - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.

Derived from superior materials including Trutaste Polypropylene with HydroGuard, and featuring double-wall insulation, the CamelBak Podium Chill Insulated Water Bottle is the perfect cold-storage water bottle for cycling adventures. Keeping your body properly hydrated and improving your on-road performance is simplified thanks to this revolutionary sports bottle. Cycling enthusiasts have for years trusted CamelBak to provide them superior bottles for water that are optimized for peak performance. And the Podium Chill bike water bottle continues to elevate CamelBak as the best of the best in the cycling world. This premium bicycle water bottle has been reengineered to securely fit in a variety of bicycle bottle cages. The water bottles are easy to squeeze, allowing you to take in more water with less effort. Our CamelBak reusable sports water bottles are engineered with a high flow, self-sealing cap, which maximizes flow rate while reducing spills and splashes. The Podium Chill is also 100% free of BPA, BPS, and BPF. This bottle also features Trutaste Polypropylene with HydroGuard materials so that you taste your water and nothing else, time after time. All parts are easy to separate, which makes cleaning a breeze. Our Got Your Bak Lifetime Guarantee covers all reservoirs, backpacks, bottles, and accessories from manufacturing defects in materials and workmanship for the lifetime of the product. The CamelBak Podium Bike Chill Insulated Squeeze Water Bottle is available in several colors, allowing you to pick one that matches your personality.

With double-walled construction to keep water cold twice as long as other bottles, the insulated CamelBak Podium Chill is the best-of-the-best for delivering cold, consistent cycling hydration. Features like optimized cage fit and improved cleanability continue to make this bottle a favorite among professionals and recreational users alike. It is and always has been 100% free of BPA, BPS and BPF. - Double-Walled Construction: Keeps water cold twice as long - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.

For hot days on the trail, the Podium Dirt Series Chill keeps your drink cold twice as long thanks to the insulated double-wall construction. The Podium Dirt Series is the premium bike bottle for mountain bikers who prioritize performance and functionality above all else. The Mud Cap keeps dirt and dust out of your bottle while the secure cage fit means you'll be able to swig and stow your bottle with confidence. Like all CamelBak Podium bottles, it features our high flow, self-sealing cap, easy-to-clean interface and easy-to-squeeze design. And, of course, it's 100% free of BPA, BPS and BPF. - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - Mud Cap: Drink water. Don't eat dirt. - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.

Is your can or bottle losing its cool? Welcome the new Horizon Can Cooler, here to ensure cooler heads prevail. It "can" fit a wide variety of 12oz can and bottle sizes within its double-walled, vacuum insulated stainless steel construction. This design will keep your beverage icy cold so you can get back to beer-in-hand soccer or chilling around the campfire.

A warm evening sunset sitting around a campfire with your best friends or family after a day of adventure is something that just can't be beat. Is your hard seltzer or fave beverage getting warm just moments after cracking a cool one? We can beat that. Thanks to our newly created Horizon Slim Can Cooler, your beverage will stay ice cold, even on those long, hot days.

Introducing a tall and handsome vessel that's ready to accompany you on your next commute or road trip. Equipped with a handle for an easy grip with either hand, this Tall Mug is designed for secure sipping. A strong and durable powder coat finish keeps the Tall Mug looking good on the outside, while vacuum insulation keeps drinks at ideal temperature on the inside.

CamelBak's streamlined HydroBak carries 50 ounces of fluid—the equivalent of two large water bottles. The over-the-shoulder hose provides easy access to liquid refreshment and the breathable mesh harness keeps you feeling great. The HydroBak is compact and has a low profile, keeping it stable and out of the way. Plus, it has an external zip pocket for keys and other essentials.

CamelBak's minimalistic Classic pack has what you need for no-hassle, no-hands hydration. With 2-liters of fluid capacity, the Classic holds the equivalent of three water bottles. You can also store your keys, cash, and an energy bar in the secure outer pocket. The reservoir is easy to fill and clean, and the breathable mesh harness allows heat to escape so you stay cool.

Ride freely all-day long with our new hydration waist pack, designed to keep you fueled and focused on the trail ahead. Minimal need, maximum effort. For when you need to let loose of excess baggage and ride your best. The compact build is perfect for carrying just the essentials and its versatility lets you exchange a reservoir for two Podium® bottles. While the waist pack design allows for freer movement and greater airflow; whether you're out for a post-work spin or a rugged weekend ride. Trust the M.U.L.E.® 5 Waist Pack to carry the essentials, keep you hydrated, and enable you to test your personal best. Made with 200D Nylon Ripstop—a lightweight but durable fabric—makes this the perfect mountain biking waist pack. Caring for this product is simple: use warm, soapy water and let it fully air dry. For more information on how to care for your CamelBak® packs check out our CamelHaks page. Our Got Your Bak™ Lifetime Guarantee covers all reservoirs, backpacks, bottles, and accessories from manufacturing defects in materials and workmanship for the lifetime of the product. Features: - Gold: Made with recycled materials and safer chemicals, designed to preserve resources and diminish disposables. - Bungee Overflow: Ideal for when you need an extra layer or a light jacket. The bungee overflow keeps all of your belongings safe, secure, and close. - Lumbar Reservoir: The Crux® Reservoir delivers 20% more water per sip, with an ergonomic handle for easier refilling and an on/off lever to prevent leaks. - Integrated Tool Organization: Efficiently laid out storage putting everything you need in its proper and easily-accessible place. - Dual Bottle Pockets: The waist pack features two bottle pockets—one on either side of the main compartment. Perfect for our Podium® Bike Bottles. - Magnetic Tube Trap™: Allows you to grab the hydration tube without having to unbuckle or unhook, for easy, on-bike hydration. - Load-Bearing Hip Belt with Cargo: Provides additional storage so you can easily access your items. - Reflectivity: Various points of high reflectivity, ensuring you'll stay visible and safe. - Air Support™ Back Panel: Breathability and increased airflow allows you to ride cooler, longer, and with minimal hot spots. - Cargo Compression: These straps let you cinch down the pack, to keep your things secure and close to the body.