Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Shop Cycling Gear

$8.99
Breaking a sweat? Grab some Nuun Sport! When you sweat, your body loses vital minerals and electrolytes that need to be replaced for healthy recovery and lasting performance. Nuun Sport provides a great balance of ingredients for mineral replenishment and optimal hydration before/during/after your workout. - 10 tablets per tube. Dissolve in 16oz. of water. - These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.
$43.95
- Guidering M to fit any 4x104mm BCD crank - Dual width "M" (narrow/wide) tooth profile engages the chain securely even at extreme angles - 7075-T6 aluminum construction optimized for all chainguide systems to prevent chain jamming - 1mm swappable chainline
$59.95
Lighter, stronger, and better looking than our original Guiderings; the Guidering SL is intended for use on TRS, LG1, and legacy e*thirteen cranks. The Guidering SL is -8mm offset. This offset will achieve both boost (52mm) and non-boost (49mm) spacing on e*thirteen cranks that feature adjustable chainline (2019 and newer TRS & LG1). On legacy and XCX cranks the Guidering SL will achieve a 49mm non-boost chainline. - Direct Mount chainring for TRS and LG1 cranks - Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain - 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains - Allows both Boost 148mm and non-boost 142mm chainline on adjustable TRS and LG1 cranks SL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings.
$64.95 - $79.95
UL Chainrings are the lightest 1x XC/Gravel chainrings on the market. Using the SL Chainring as the platform, we tweaked the arm design and strategically machined the chainring so that only minimal sacrifice was made in impact strength for large gains in weight reduction. - Direct Mount chainring for XCX, TRS, and LG1 cranks - Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain - 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains - Provides Boost 148mm chainline on XCX Mountain cranks and 142mm chainlines on XCX Gravel cranks - Provides chainline for Superboost spacing on TRS and LG1 cranks UL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings available soon.
$61.99 - $64.99
absoluteBLACK Round 104/64 BCD Chainrings are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - The chainring's offset helps to create an ideal chainline - Provides exceptional reliability, weight savings, and stiffness - 9, 10, 11, and 12-speed Eagle compatible - Use with absoluteBLACK short chainring bolts
$75.49
absoluteBLACK Oval 96 BCD 1x Chainrings greatly improve traction and climbing abilities. They are designed for use with Shimano XTR M9000 and M9020 cranks only. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Only compatible with Shimano XTR M9000 and M9020 cranks - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Rings have built-in threads for ease of mounting and reduction in weight - Not compatible with Shimano XT M8000 cranks
$79.49
absoluteBLACK Round Direct Mount 1x Chainrings for SRAM offer flawless drivetrain setup for SRAM 1x9, 1x10, 1x11, and 1x12-speed or single speed. They are designed for SRAM DUB, GXP, and BB30 cranks that have a removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long-Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks
$88.95 - $95.95
This absoluteBLACK 1x Oval Direct Mount Chainring for CINCH is designed exclusively for use with Shimano Hyperglide+ chains (CN-M9100, 8100, and 7100). Oval chainrings greatly improve traction and climbing abilities. They are crafted from CNC machined 7075 aluminum for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%. - This chainring will only work with Shimano Hyperglide+ CN-M9100, 8100, & 7100 chains due to the different thickness of the teeth - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed) - Provides excellent weight-to-strength ratio
$44.00 - $47.00
Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.
$59.00
If you've got a truck bed or pretty much anywhere you can insert a couple bolts, you've got yourself a place to install this handy fork-style bike mount. This one comes with a locking single-sided adjustment skewer so you can secure your bike easily. Includes SKS lock core and two SKS keys. - A "bolt anywhere" fork-style bike mount - Fits bikes with 9mm x 100mm front hubs - Locking single-sided adjustment skewer with long throw for easy bike loading. SKS Lock Core included - Corrosion-resistant anodized aluminum construction Product Specs: - Weight: 1.45 lbs. - Limited Lifetime Warranty
$80.00
Put down the drill, you don't need it. This fork mount attaches to the inside lip of your truck bed easily and comes with a locking skewer so you can leave your bike in your bed with confidence that it will be there when you come back. - Truck-bed bike fork mount that allows you to attach your bike to the inside lip of your truck bed rail without any drilling - Fits bikes with 9mm x 100mm front hubs - Locking single-sided adjustment skewer with long throw for easy bike loading. SKS Lock Core included. - Corrosion-resistant anodized aluminum construction - Soft padding to protect your vehicle's paint job Product Specs: - Weight: 2.20 lbs. - Dimensions: L 3.00 in x W 1.50 in x H 4.00 in - Limited Lifetime Warranty
$179.00 - $199.00
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck's tailgate while the soft felt backing protects your truck's paint. Integrated SitTight bike cradles and G-hook buckles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - G-Hook tension lock system is easy on carbon bike frames and painted surfaces - Medium: Transports up to 5 bikes; Large: Transports up to 6 bikes - Rugged, vinyl coated nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your trucks paint job - Add your own bike lock to the built-in cable lock loop to secure GateKeeper and your bikes to your truck - Reinforced webbing ends for easy installation under the tailgate - Integrated strap management system keeps the pad tight and secure on the way to the trailhead - HindSight tuck-away cover opens up the view for your back-up camera - Medium: Fits mid-size and some older full-size trucks with tailgates from 53-61" wide; Large: Fits modern, full-size trucks with tailgates 62" or wider - Printed graphics and silver reflective Yakima logo PRODUCT SPECS - Size Medium: Weight: 6.43 lbs; Dimensions: L 53.00 in x W 5.00 in x H 17.00 in - Size Large: Weight: 8.15 lbs; Dimensions: L 62.00 in x W 7.00 in x H 20.00 in
$319.00
A fresher take on the classic strap rack, the Yakima FullBack 3 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 3 TECHNICAL SPECS - Weight: 23.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”
$379.00
This handy add-on doubles your HoldUp bike hitch carrier's capacity from 2 to 4 bikes—perfect for quadruplets on a family outing. Holds up to two bikes. - Expands your bike-hauling capacity from 2 to 4 bikes - StrongArm design secures bike at wheels, protecting paint and carbon frames - Fits 20" – 27.5" wheel sizes with tires up to 3.0" wide and 29" tires up to 2.5" wide - Accommodates bike wheelbases up to 48" - Accommodates disc brakes, through axles, and full suspension bikes - Tilts down with bikes loaded for rear-of-vehicle access - Side-to-side adjustability to adjust space between bikes - Carries 2 bikes (2" receiver only) - 4 bikes, 200 lbs total, with the HoldUp Product Specs: - Weight: 49.00 lbs. - Dimensions: L 56.50 in x W 64.00 in x H 12.00 in - Limited Lifetime Warranty
$419.00
Great for families, double dates, or bringing your entire bike quiver, the HoldUp EVO +2 turns the 2" HoldUp EVO into a four-bike hauler. It's versatile enough to handle most bikes, from BMX to fat tire bikes. The StrongArm hook secures the bikes at their wheels, protecting carbon frames and painted surfaces. The whole unit can still tilt down and out of the way with bikes loaded, for easy rear-of-vehicle access, and the empty trays fold up and out of the way when not in use. Included SKS locks for each bike give you peace of mind. - Attaches to the 2" HoldUp EVO to carry two additional bikes - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Trays easily adjust to reduce bike-to-bike interference - Tilts down with bikes loaded for rear-of-vehicle access - Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes, & E-bikes under 50 lbs. - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20" to 29" wheel sizes and tires up to 4.8" wide - ?Accommodates bike wheelbases up to 48" - Integrated SKS (Same Key System) locks included for added bike security - Compatible only with 2" version of HoldUp EVO & HoldUp Product Specs: - Weight: 36.44 lbs. - Dimensions: L 27.00 in x W 42.00 in x H 8.00 in - Limited Lifetime Warranty
$500.00 $1,049.00 52% Off
All your bikes, all at once. The HangTight is designed for versatility, built to handle adventures of all sorts, and won’t blink at anything from kids to fat bikes to road to mountain bikes and everything in between. With fully padded cradles that support each bike by the handlebars, it serves up a shuttle-ready blend of stability and ease of use. The HangTight will get your bikes to the ride and back home safely no matter if your crew is a mix of all-mountain shredders or simply a family headed out for two-wheeled exploration.
$849.00 $899.00 6% Off
The StageTwo is built to carry your valuable steeds anywhere you need to go, securely and in style. From road to mountain and kids to fat bikes the StrongArm hook quickly secures your bike. The stadium seating tiered architecture increases ground clearance on rutted trails or steep driveways. While the offset tray design further minimizes bike to bike interference and maximizes functionality. The Tool-free locking SpeedKnob™ 2.0 makes install easier than ever, and the forward-facing remote tilt lever means fast access to the rear of your vehicle and integrated locking cables, combined with the ability to add your own lock, provide serious security. - Tiered and adjustable bike trays minimize bike to bike interference and maximize ground clearance? - StrongArm™ hook secures bike at wheels, protecting painted surfaces and carbon frames - Convenient remote tilt lever for easy rear of car access - Tool-free locking SpeedKnob for secure and simple instillation and removal - Offset Trays for extra bike to bike clearance - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, BMX, kids’ bikes, & E-bikes up to 60 lbs. each - Fits 16” to 29” wheel sizes and tires up to 3.25” wide and up to 5" wide with the StageTwo Fat Bike Kit (Sold Separately) - Accommodates bike wheelbases up to 52” - Integrated SKS (Same Key System) locks included to secure bikes to rack and rack to vehicle receiver - Tilts forward with bikes loaded for trunk access - Add your own bike lock to the integrated lock loop for greater bike security - Available in two sizes: 1.25” hitch receivers & 2” hitch receivers - Carry four bikes – just add the StageTwo 2 (compatible with 2” version only) - Available in two colorways, Anthracite and Vapor (2" only) - RV and Off-Road rated to 36lbs per bike
$199.99 - $200.49 $199.99 - $200.49 On Sale
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel
$32.99
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
$64.99
Looking for a SRAM XO1, X1, GX, and NX chainring with the proven chain retention of our patented Drop-Stop® chainrings? Wolf Tooth has what you need in these beautifully machined 94 BCD bolt-on chainrings. - Fits any 94 BCD SRAM crankset - Drop-Stop® technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit any SRAM mountain bike crankset with a 94 BCD. Note that we also offer SRAM direct mount chainrings for standard, boost and BB30 short spindle cranksets and some stainless steel versions. - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - 49mm - Provides a great chainline on most boost bikes. Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30t • 44g | 32t • 54g | 34t • 63g - Material: 7075-T6 aluminum - Made in the USA - US Patent 958123
$69.95
Looking for a 1X chainring for your new Shimano XT, SLX or Deore crankset with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in the form of a beautifully machined asymmetrical 96 mm BCD that provides the ideal 1X chainline of 49mm. Note - The 28T and 26T sizes will mount to the inner 64 BCD mounting position on these cranksets. Compatibility: - These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC M5100 1x or 2x cranksets - Not compatible with Deore triple (3x) cranksets - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most Boost bikes. See this explanation for details. - Drop-Stop A models will reduce the chainline (inward towards the frame) from the Shimano specified chainline for the crankset: 26T-28T = -3mm, 30T-34T = -2mm, and 36T-38T = -1mm - Drop-Stop ST models will have the same chainline as the Shimano specified chainline - 10mm bolts are optimized for mounting this ring - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 26t/42g | 28t/50g | 30t/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA
$74.95 - $76.95
"More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you’re climbing. We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® tooth profiles for the best wear life, chain retention and mud clearance. We have optimized tooth profiles for SRAM T-Type Transmission, Shimano Hyperglide+, and all 12, 11, 10, and 9-speed chains. Compatibility - Any Race Face Cinch™ system crankset (including Next SL, Sixc, Turbine, Aeffect) - Riders running SRAM Transmission w/ Race Face Cinch cranksets with a Boost 136/137mm spindle use a Cinch direct mount 0mm offset chainring. - Riders using a Cinch crankset with a Super Boost 151mm spindle use a Cinch direct mount 3mm offset chainring. - Standard (142mm rear hub spacing) 6mm offset, Boost (148mm hub spacing) 3mm offset, and Boost for T-Type Transmission 55mm chainline 0mm offset are available. - Use a 3mm offset chainring for Super Boost applications running standard drivetrains or Transmission. - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) --- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!) - Chainline 49mm (standard), 52mm (Boost), 55mm (T-Type Boost) - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck."
$84.95 - $89.95
These chainrings are for Shimano GRX cranks. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Drop-Stop ST is specifically for the Shimano 12-speed Hyperglide+ chain, which is used by GRX 12-speed. Drop Stop-B works with all other 9, 10, 11, and 12-spd chains, including SRAM Flattop. Compatibility: - Shimano GRX cranksets including RX600 and RX810 - Drop-Stop ST is designed for Shimano 12-speed Hyperglide+ chains - Drop-Stop B tooth profile is compatible with SRAM Flattop chain - Wolf Tooth’s patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud-shedding ability - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains
$39.90 - $55.00
- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"
$48.00
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation
$105.00
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7. - Carbon shaft absorbs trail chatter - UD carbon shaft, forged aluminum head
$145.00 - $165.00 $159.00 - $165.00 Up to 12% Off
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding
$47.49
BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
$49.99
The Volt is our most popular mountain saddle. Shaped for speed and comfort, time tested and proven, the Volt makes for an incredibly versatile saddle that has gained endless acclaim among riders. - Medium padding thickness and subtle curves make the Volt our most popular mountain saddle - An upward curved tail and gentle drop to the nose provide something to push against while pedaling - Steel rails
$129.95
An excellent all-mountain and distance saddle, the Pure features a drop nose design preventing hang ups, as well as enough padding for all day comfort. The Pure is a sure bet for almost any rider and an even better bet for bikepackers! - Microfiber Cover - Flex-Tuned Shell - DNA Padding - Titanium rails - Weight: 239g
Page 1 of 22 Next page