Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees
A revolution in performance and reliability. The kit includes premium internal components: - Enduro catridge bearings - Enduro sealed needle bearing - Double seal system (internal and external seals) - Hex alloy end caps - O-rings, nuts - Sleeve bushings - Bearing removal tool
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction pins: 9 per side (mounted from back) - Inner Bearing type: Igus LL-glide bearing - Outer Bearing type: Enduro cartridge bearing - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 100mm x 100mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 299g per pair
Size-specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details - Optimal surface area - Minimal profile 16mm thin - 10 adjustable 8mm pins per side for grip - 10mm pins available for purchase here - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (US) // 37-43 (EU) - Stamp large recommended for shoe sizes: 10-15 (US) // 43-49 (EU) - Serviceable, pedal refresh kit available Specs - Adjustable pins: 10 per side - Body Material: A380 Aluminum - Endcap: T15 - Footprint: 100mm x 100mm (Small), 114mm x 111mm (Large) - Inner Bearing Type: Igus Bearing - Max Rider Weight: No restriction - Outer Bearing Type: Double Cartridge Bearing - Shoe Size: US 5-10 // EU 37-43 (Small), US 10-15 // EU 43-49 (Large) - Spindle Material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 439g per pair (Small), 494g per pair (Large)
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design sheds mud and debris quickly, and these pedals sport 6-degrees of knee-friendly float. The Eggbeater 2s feature forged chromoly axles, stainless-steel springs, and cast steel bodies. Plus, the internals are water-tight for excellent durability and consistently smooth pedaling.
Size specific magnesium platform pedal provides optimal shoe/pedal interface. Details - Magnesium pedal body for weight reduction - Optimal surface area - Minimal body profile - 16mm thin - Concave pin profile & 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Serviceable, pedal refresh kit found here Specs - Adjustable pins: 10 per side - Body material: AM60B Magnesium Alloy - Endcap: T15 - Footprint: 114mm x 111mm - Inner bearing type: Igus Bearing - Max rider weight: No restriction - Outer bearing type: Double Cartridge Bearing - Shoe size: US 10-15 // EU 43-49 - Spindle material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 386g per pair
The Compound pedals are fully serviceable with sealed bearings and chromoly pins and spindle. These pedals beg you to challenge them as they continue to perform hassle free for as long as you let them. Not only will they surprise you with durability, but the colored composite pedal body never fades or shows wear as the color runs throughout to deliver a fresh pedal day in and day out. - Lightweight injection-molded nylon fiber composite body - Replaceable chromoly pins - Super-thin profile - DU bushing and double-micro-sealed bearing system - Fully sealed, rebuildable, thin, and offer the same grip as a traditional aluminum pedal - Nylon fiber blend does not get hung up on rocks or ledges - Nylon fiber body does not shatter - 9/16"
With the addition of the DEFTRAP pedal, we sought to revolutionize the expectations for nylon composite pedals. Built around a true concave profile, the top-tier nylon and glass fiber composite material creates a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, and the ability to skim over rocks all offered in 10 colors, the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market. - All-new pedal design inspired by the world-renowned TMAC pedal - Injection molded nylon fiber composite body - Premium nylon glass fiber composite material is 28% stronger than nylon composite used by most leading brands - Nylon glass fiber blend does not get hung up on rocks - Non-offset symmetrical design gives the rider perfect weight distribution across the pedal, creating a very stable platform through rough terrain. - Large 113mm L x 103mm W footprint - True concave pedal body profile - 1.5mm of concave shape in the pedal body (per side) - 18mm thick at the center - Best-in-class 10 pins per side (8 replaceable steel pins, and 2 fixed nylon pins) - 2 sealed bearings with oversized DU bushing design is robust and reliable - Open channeling for optimized mud and snow shedding capabilities - Not the average plastic disposable pedal...the DEFTRAP Pedals are fully sealed, rebuildable, thin, and offer the same or better grip in comparison to a traditional aluminum pedal - Brilliant design for all types of riding (Trail, Enduro, Downhill, Dirt Jumping, Commuting) - 391 grams per pair
Black Kat pedals are built around a larger double-sealed bearing system, with a larger platform, thinner body and overall lighter appeal. These pedals bring great value by utilizing a concave shape to the platform, rounded edges at the spindle, traction grooves throughout, and included an additional pin kit with every purchase. - Extruded and CNC Machined 6061 T6 Aluminum - 100mm x 100mm platform - Concave body - Fully Serviceable DU Bushing and Double Micro Sealed Bearing System - Intended Use: Downhill, FR/DJ, Enduro, All Mountain - Allen bolt style pins - Additional Allen Pin kit included - 9/16"
Our lightest and thinnest pedal to date, the BLADERUNNER pedal has become synonymous with peak performance and endurance. The perfect platform pedal for any application, this super-minimized design is 11mm thin with a platform large enough for incredible stability. It thrives in the most technically challenging conditions possible. When ground clearance is a priority, you will be hard pressed to find a pedal more suitable for rocky terrain. We've left no detail unrefined with this masterpiece – down to the additional pin kit included with purchase and load-distribution system to prevent bearing blowout from side impact – these pedals are yet another DEITY design that sets the bar for excellence. - Extruded and machined from 6061 T6 aluminum using Deity dies - Thin 11mm profile at the exterior edges - 103mm x 100mm footprint - Concave pin profile - Load-distribution system to prevent bearing blowout - Multi-micro-sealed bearings and Deity DU Bushing internals - 10 allen bolt pins per side keep your feet glued - Machined traction grooves - Minimal material in key areas to shed weight and mud build-up - Stepped black polished Cr-Mo axle is compatible with 8mm allen keys or also a standard 15mm pedal wrench - Fully serviceable without requiring removal from the bike - Rebuild kits available - Pedals come with an extra set of pins for backups - Weight: 370 grams (pair)
TMAC Signature Tyler McCaul Pedal. With over two years of development, it features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint. - Tyler McCaul signature pedals - 110mm x 105mm footprint - Super-concave 2.5mm deep pedal profile per side - 14mm thin at the center - Symmetrical pedal profile for added foot support and stability - Dual sided pins with pre-applied Loctite - Includes extra set of back-up pins - Load distribution system to prevent bearing blowout - Multi-micro-sealed bearings and Deity DU Bushing internals - Heat-treated chromoly spindle that is compatible with a standard 15mm wrench or 8mm allen - 9/16"
Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included
Dimension Junior Pedals. - Molded nylon, 1-piece, caged-type pedals - Built-in reflectors, will not accept toe clips - Overall pedal size is 80 x 60mm - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch or 1/2-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 230g (9/16-inch); 304g (1/2-inch)
$54.95 - $59.95
An excellent choice for year round riding. Fyxation's robust impact-grade nylon body, sealed-bearing construction, and grippy metal pinned platform with full stainless steel pins. For the fat-biker or winter commuter, the durable stainless pins add an extra layer of rust protection for the harshest riding conditions. - High-impact nylon body built to take abuse - Smooth-running sealed bearing and DU bushing - Electroplated chromoly spindle - Electroplated stainless steel replaceable pins for added grip with shoes or boots - Nylon body doesn't suck heat out of your feet like alloy pedals do - Height: 14mm - Width: 105mm - 9/16"
HT's AN14A Pedals are simple, reliable platform pedals. CNC'd aluminum body with replaceable pins, and a low profile for extra ground clearance. - Platform: 94 X 95 X 17mm - 10 replaceable pins per side - 9/16"
The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g
Secure your everyday cycling confidence and comfort in the essential urban pedal from LOOK. Geo City is a lightweight, upgradeable and affordable platform pedal but with all the style, quality and durability that’s made LOOK pedals the champion’s choice for decades, and the best out on the city streets today. - Technology: Flat pedals - Body: Composite - Traction: Composite - Spindle: Chromoly+ - Surface area: 110x107mm - Weight (pedal): 165g - Weight (pair): 330g
Discover the world of clipless pedals with the KEO CLASSIC 3. The easily adjustable tension makes clipping in and out smooth and simple, with the ability to increase tension to fully appreciate the pedal and all its advantages. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly - Platform Material: Composite - Platform area: 400mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.8mm (11.5 + 6.3mm) - Weight (pedal): 140g - Weight (pair + cleats): 350g
The new LOOK Trail Roc is the maximum grip, full metal pinned pedal for aggressive riding. The distinctive lightweight, low profile design gives centered control and feedback with adjustable pins for ultimate grip. With our championship proven bushing and bearing system on oversized 17mm axles, your next hardcore pedal is here. - Technology: Flat pedals - Body: Alloy - Traction: 12 metal pins per side - Spindle: Chromoly+ - Surface area: 110x110mm - Profile: 17mm - Weight (pedal): 215g - Weight (pair): 430g
The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 130g - Weight (pair + cleats): 328g
KEO BLADE CARBON pedals feature a Chromoly+ axle and stainless steel bearings for extreme reliability. Beyond its weight, the surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals have all you need to take it to the next level. - Technology: Blade - Cleats: Keo Cleat - Retention: Serial installed in 8 + additional 12 in box - Body: Carbon - Blade: Composite - Spindle: Chromoly+ - Bearings: Steel - Platform area: 700mm² - Platform width: 67mm - Q Factor: 53mm - Stack height + cleats: 14.8mm (8.5 + 6.3mm) - Weight (pedal): 115g - Weight (pair + cleats): 300g
Sometimes you wear mountain bike shoes; sometimes you wear sneakers. MSW's CP-200 Platform and Clipless Pedals have you covered, whatever your footwear. These versatile pedals feature a wide, stable platform on one side and an SPD-style clipless entry on the other. Adjustable spring tension on the clipless side lets you customize how much pressure it takes to unclip, while sealed bearings keep you spinning smoothly for endless miles. And, the pedals are rebuildable to further maximize their lifespan.
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
A new addition to the Race Face flat pedal line up: the Chester Pedal. This tough and burly nylon composite body provides a large platform with the same grip as traditional alloy pedals via the bottom loading 8 hex traction pins per side. Thin and lightweight is the name of the game with Chester, featuring a cro-mo axle that is fully sealed and a 100% serviceable bearing and bushing system. This pedal offers great performance for a wide range of riders at a price that leaves plenty of cash in pocket to spring for that round of bevies at your local watering hole after hammering out a day of hot laps with the crew. - Nylon composite body - Replaceable steel pins (8 per side) - Fully sealed - Serviceable - Smooth and durable sealed bearing and bushing system - Cro-mo axle - Thin and lightweight concave platform - Large platform with same grip as traditional pedals
$50.49 - $54.99
Here For The Party A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing. The Full Meal Deal A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side. Not Just Another Axle Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up. Bling For Your Bike No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from. Specs - Platform Height: 18.4mm - # of Pins: 16 SHCS hex traction pins per pedal (8 per side) - Platform L x W: 101 x 110mm - Axle Material: Chromoly Steel - Body Material: Nylon Composite - Material: Nylon Composite - Weight: 360g
- Thin platform, concave aluminum body with bottom loading pins. - Shorter spindle design shaves weight. - Thin concave platform - Reduced spindle length saves weight - Hex-head threaded pin design offers more bite for added security - Hidden / Grease access port for extended life - Platform size: 101x100cm - Cartridge bearings and DU bushings - 20 SHCS hex traction pins per pedal
Page 1 of 2 Next page